Makita 5007mg: Pros And Cons, Common Issues, And Best Places To Purchase

Makita 5007MG Information

the information about the Makita 5007MG circular saw:

Introduction

The Makita 5007MG is a 7-1/4 inch circular saw that is designed for framing, ripping, and bevel cutting. It features a powerful 15 amp motor that delivers 5,800 RPM, as well as magnesium components that make it lightweight and durable. The saw also has a number of features that make it easy to use, including a built-in dust blower, dual LED lights, and an adjustable rip fence.

Image

Specifications

• Motor: 15 amp
• RPM: 5,800
• Blade size: 7-1/4 inches
• Bevel capacity: 0 to 56 degrees
• Cutting capacity: 2-1/2 inches at 90 degrees
• Weight: 10.6 pounds

Features

• Powerful 15 amp motor delivers 5,800 RPM for fast and precise cuts
• Magnesium components are lightweight and durable
• Built-in dust blower clears the line of cut for more accurate cuts
• Dual LED lights illuminate the line of cut for increased visibility
• Adjustable rip fence for precise cuts
• Soft grip handle for comfortable operation

What's in the box

• Makita 5007MG circular saw
• 7-1/4 inch 24T ultra-coated carbide-tipped saw blade
• Hex wrench
• Rip fence
• Hard case

Overall

The Makita 5007MG is a powerful and versatile circular saw that is well-suited for a variety of applications. It is easy to use and has a number of features that make it a great choice for professional and DIY users alike.

Here is a table of the specifications for the Makita 5007MG:

Feature	Specification
Motor	15 amp
RPM	5,800
Blade size	7-1/4 inches
Bevel capacity	0 to 56 degrees
Cutting capacity	2-1/2 inches at 90 degrees
Weight	10.6 pounds

I hope this information is helpful. Please let me know if you have any other questions.

Makita 5007MG Compare with Similar Item

a table comparing the Makita 5007MG with two similar circular saws:

Feature	Makita 5007MG	DeWalt DW717	Bosch 4100XC
Cutting capacity	1.5 inches (at 90 degrees)	1.75 inches (at 90 degrees)	2 inches (at 90 degrees)
No-load speed	5,800 RPM	5,700 RPM	5,800 RPM
Weight	9.2 pounds	10.5 pounds	11.1 pounds
Features	Magnesium base, dust blower, laser guide	Steel base, dust blower, laser guide	Steel base, dust blower, laser guide
Price	$179	$219	$239

As you can see, the Makita 5007MG is the lightest of the three saws, but it also has the lowest cutting capacity. The DeWalt DW717 is the heaviest saw, but it has the highest cutting capacity. The Bosch 4100XC is in between the other two saws in terms of weight and cutting capacity.

Ultimately, the best saw for you will depend on your specific needs. If you need a lightweight saw for occasional use, the Makita 5007MG is a good option. If you need a heavy-duty saw for professional use, the DeWalt DW717 is a better choice. And if you need a saw with a high cutting capacity, the Bosch 4100XC is the best option.

Here are some additional details about each saw:

• Makita 5007MG: This saw is made with a magnesium base, which makes it lightweight and durable. It also has a dust blower and laser guide to help you make accurate cuts.
• DeWalt DW717: This saw is made with a steel base, which makes it more durable than the Makita 5007MG. It also has a higher cutting capacity and a more powerful motor.
• Bosch 4100XC: This saw is made with a steel base and has a high cutting capacity. It also has a laser guide and a dust blower.

I hope this table comparison helps you choose the best circular saw for your needs.

Makita 5007MG Problems and Solutions

Sure. Here are some common issues and problems with the Makita 5007MG, along with solutions from experts:

Issue: The tool won't turn on. Solution: Check the power cord to make sure it's plugged in properly. If the power cord is plugged in and the tool still won't turn on, check the fuse. If the fuse is blown, replace it.

Issue: The tool is overheating. Solution: Allow the tool to cool down before using it again. If the tool continues to overheat, there may be a problem with the motor. In this case, you should contact Makita customer service for assistance.

Issue: The tool is not drilling straight. Solution: Make sure the drill bit is sharp and that the chuck is tightened properly. If the drill bit is sharp and the chuck is tightened properly, the problem may be with the alignment of the drill bit. In this case, you can try adjusting the alignment of the drill bit or replacing the drill bit.

Issue: The tool is making a strange noise. Solution: Stop using the tool immediately and inspect it for damage. If you can't find any damage, the noise may be coming from the motor. In this case, you should contact Makita customer service for assistance.

Issue: The tool is not working as well as it used to. Solution: The tool may need to be cleaned or serviced. You can try cleaning the tool yourself or you can take it to a qualified technician for service.

I hope this helps!